Koriscenje kodova na Vas rizik.
Use these codes at your own risk.

*#06#	IMEI number 

Information you get from the IMEI:
XXXXXX  XX  XXXXXX  X
 TAC       FAC   SNR      SP

TAC    Type Approval Code (first 2 digits = country code)
FAC    Final Assembly Code 
SNR    Serial Number
SP        Spare (always SP=0)

Following procedure will show the software version in first two rows of the display and manufacturing date of the phone
on the last one (simbols ">" and "<" are respectively the right and the left arrows of the keypad)..

>*<<*<*

*#0000#	Quickly reset menu language to english

To check the battery level when the phone is off and not charging, press very quickly NO and wait for about 2 seconds.

>*<<*<*>	1-row text strings. if pressing yes you can check 
the phones text programming in currently selected language(298 entries).

>*<<*<*>>	n-row text strings. if pressing yes you can check 
the phones text programming in currently selected language(160 entries).

Pin-outs:
1 = + external power supply
2 = RS232 input (TTL)
3 = GND (digital)
4 = RS232 output (TTL)
5 = +5V output
6 = Test
7 = Mute
8 = Internal/external
9 = GND (analogic)
10 = ?
11 = BF in
12 = BF out

Short description of pins
1 It is for best external power supply, to charge the phone battery.
The external power supply alone without the phone battery DOES NOT switch on!
Suggested voltage 7.2V with 600mA at least.
2 The RS232 serial line input at TTL (0/5V) level.
When the phone is on, this pin is at "0" (?!?!?), against any logic.
Connect your interface RS232/TTL even if its output is 1!!!
3 GND digital
4 It is the RS232 serial out put at level TTL (0/5V). When the
phone is switched on this pin is at 1 (this seems logical!).
5 +5V output with phone on. Usable provided that few mA are absorbed.
6 Mode test. As a general rule is at 0. To switch in test mode, switch the
cellular off, set the pin at 1 (+5V), switch the phone on.In this mode the serial
line works at 115200 instead of the standard 9600.
7 Mute. Normally at 0, it goes at 1 while scrolling or during a conversation.
Useful to mute the possible ear breaking radio!
8 If open, the internal microphone and loudspeaker are on. If at 0, the external ones are enabled.
9 GND analogic
10 The function of this pin is a mystery. It seems like a microphone and loudspeaker attenuates when at 0.
11 BF in
12 BF out

Shortcut for Last Dialed call menu
If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key stroke instead: First '0' then '#'.

Full Network Name
You can see the Full Network Name by doing the following:
Go to the network menu, when the phone displays the networks available (in 'Select net' and 'Edit list' menu) you can press * and you will see the full name.

Full Operator List
You can view the full operator list by doing the following:
Go to the 'Edit list' menu under 'networks'. The phone say 'please wait' (searching for other networks). When finished,
Press the < key once, then YES twice. Now the phone displays the full list. Browse through the list with the < > keys.