Koriscenje kodova na Vas rizik.
Use these codes at your own risk.
*#06# IMEI code of your phone
Information you get from the IMEI:
XXXXXX XX XXXXXX X
TAC FAC SNR SP
TAC Type Approval Code (first 2 digits = country code)
FAC Final Assembly Code (For Nokia phones FAC=10 or 20)
SNR Serial Number
SP Spare (always SP=0)
*#0000# Software version, date of manufacture and hardware model number
of your phone
This is what the
Nokia 5110 displays when software code is typed.
V 04.51 Software
Version
26-03-98 The date of the SW release
NSE-1 Type of phone
*#92702689# (= *#war0anty#)
Get additional information from your phone -
"warranty code"
Now you are in
service menu where you'll find:
1 IMEI (International Mobile Equipment
Identification)
2 Made MM/YY (date of production of the phone mm/yy)
3 Purchasing Date (here you can enter the date of
purchase
If you enter an incorrect
date, you cannot correct it later
4 Repaired (date of repair, if there was one)
5 Transfer user data
*3370# EFR (Enhanced Full Rate) will be activated
after a reboot of the phone (consumes more power)
#3370# EFR (Enhanced Full Rate) will be switched off
after a reboot of the phone
*4720# Half Rate coded will be activated
after a reboot of the phone (better standby time)
#4720# Half Rate coded will be de-activated
after a reboot of the phone
If you press the
"Power on" button for a short moment, the
menu with the profiles is shown on the display. If
you press one more time, the mobile turns itself
off. You can use the up and down cursor keys to
scroll and enable a different alert setting.
*#746025625# [*#sim0clock#]
to check if the Sim-Clock can be Stopped
(Sim-clock-stop is a kind of standby mode which will save battery time)
Type 1#,
2#........54# on the keypad (when you're not in the
menu) to get the phone number used for with this key
when speed dialing.
|
