Koriscenje kodova na Vas rizik.
Use these codes at your own risk.

*#8110#	Software version, date of manufacture and hardware model number
	of your phone. 

This is what the Nokia 8110 displays when software code is typed.

V 24.23		Software Version
08-08-97	                     The date of the SW release
NHE-6		Type of phone

*#06#	IMEI code of your phone

Information you get from the IMEI: 
XXXXXX  XX  XXXXXX   X 
 TAC       FAC   SNR       SP
TAC	Type Approval Code (first 2 digits = country code)
FAC	Final Assembly Code (For Nokia phones FAC=10 or 20)
SNR	Serial Number
SP	Spare (always SP=0)

*#92702689# (= *#war0anty#)	Get additional information
from your phone you can use the so called "warranty codes" 

You will be asked a 'warranty code:' type:

6232 (OK) : To display the Month and Year of Manufacture.
7332 (OK) : To display the date of the last repairment.
7832 (OK) : To display (if previously set) the date where the phone was purchased.
9268 (OK) : To display the Serial Number.
37832 (OK) : To set the Purchasing Date MMYY (Warning: You can only do this once)
87267 (OK) : To Confirm Transfer

*#746025625#   [*#sim0clock#]
to check if the Sim-Clock can be Stopped
(Sim-clock-stop is a kind of standby mode which will save battery time)

Pin-Out

Desktop Charger----------------------|

             |                       |

             |                       |

CHARGER--|   +      TOP OF PHONE     -

         V   V    1  2  3  4  5  6   V  

        (o) | |  [=  =  =  =  =  =] | |

                7  8  9  10 11 12   

1   - Charger/System Ground
2   - Accessory Output Supply. (3.4V...10V - 50mA)
3   - External Microphone Input and Accessory Identification
       *1,7...2,05 V Headset Adapter Connected
       *1,15...1,4 V Compact Handsfree Unit Connected
       *2.22...2.56 V Infra Red Link Conneceted
4   - External RF Control Input
       *0...0.5V External RF in use
       *2.4...3.2V Internal Antenna in use
5   - FBUS Transmit
6   - Serial Control Bus
       *Logic Low Level: 0....0.5V
       *Logic High Level:2.4V....3.2V
7   - Not Connected
8   - Signal Ground
9   - External Speaker and Mute Control
       Mute ON (HF SPEAKER MUTE ):0...0,5 V d.c.
       Mute OFF (HF SPEAKER ACTIVE ): 1,0...1,7 V d.c.
10 - Hook Signal
       *Hook Off (Handset in Use): 0....0.5V
       *Hook On (Handset in Use): 2.4V....3.2V
11 - FBUS Receive
12 - Charging Supply Voltage (Max 16V)